Factory-Link-SPE-G 1000BASE-T1 Media Converter

The Factory-Link-SPE-G is a physical layer media converter that connects 1000BASE-T1 with 1000BASE-T networks as well as 100BASE-T1 with 100BASE-TX networks. It supports 802.3bp autonegotiation or alternatively a proprietary master/slave negotiation protocol. Master/slave role, speed and auto-negotiation are set via DIP switches. Using the Control Center software, link status and signal quality can be displayed, T1 cable diagnostics can be executed and PHY registers can be accessed. Power is supplied via a dedicated power connector or via the USB port. The power supply switches seamlessly between both inputs. The T1 connection comes with an IEC 63171-6 compliant connector face and features an inductive front-end with additional ESD protection. The housing can be grounded via the power terminal or the grounding screw.

Technical data::

• Standards: IEEE802.3bp, IEEE802.3bw, IEEE802.3ab, IEEE802.3u
• 1000BASE-T1 Port (IEC63171-6 - Harting T1 Industrial Jack AH IP20)
• T1-PHY: BCM89881 (Broadcom)
• 1000BASE-T Port (RJ45)
• T(X)-PHY: BCM54811 (Broadcom)
• Master/Slave and Speed (1000/100) Setting via DIP Switch
• Automatic Master/Slave detection
• 802.3bp Auto-Negotiation
• Automotive Cable Diagnostics (T1 connection)
• USB-C Port: 5V Power Supply, Configuration, Firmware Update
• 3Pos Terminal Block: 5V - 28V DC Power Supply
• Power Consumption: < 150mA @ 12V
• Environmental Temperature Range: -40°C - +65°C
• Aluminium Housing with grounding screw
• Dimensions: 75 x 30 x 78 mm (WxHxD)

Scope of supply:

• Factory-Link-SPE-G (Industrial SPE 1000BASE-T1 Media Converter)
• Power Connector Receptacle (3Pos Terminal lock Plug)
• USB Cable (USB-A to USB-C)