1000BASE-T1 Media Converter (Sept. 2020)

The Auto-Link-SPE-G easily connects 1000BASE-T1 and 1000BASE-T networks. It supports 802.3bp auto-negotiation and proprietary master/slave detection. It is also backwards compatible with 100BASE-T1 and 100BASE-TX. Master/slave role, speed and auto-negotiation can be set via DIP switches. Using the Control Center software, link status and signal quality can be displayed, T1 cable diagnostics can be executed and PHY registers can be read and changed. Power is supplied via the dedicated on-board power connector or the USB port. The dual power supply switches seamlessly between both inputs.

  • Standards: IEEE802.3bp, IEEE802.3bw, IEEE802.3ab, IEEE802.3u
  • 1000BASE-T1 Port (Molex Mini50 4pos)
  • 1000BASE-T Port (RJ45)
  • USB-C Port (Firmware Update & Configuration)
  • Link/Activity LEDs for both LAN-Ports
  • Master/Slave and Speed (1000/100) Setting via DIP Switch
  • Automatic Master/Slave-Detection
  • 802.3bp Auto-Negotiation
  • 802.3bp Link Type-A (15m TP)
  • Automotive Cable Diagnostics (T1 connection)
  • Robust Aluminium Housing
  • Dimensions: 75 x 30 x 82 mm (WxHxD)
  • Voltage Range: 5V - 28V DC (Molex Mini50 2pos) / 5V (USB-C)
  • Power Consumption: < 150mA @ 12V
  • Environmental Temperature Range: -40°C - +65°C

If you are interested in a test sample please use our contact form or send an e-mail to info@i-novative.de

100BASE-T1 Media Converter

The cost efficient 100BASE-T1 Media Converter easily connects 100BASE-T1 and 100BASE-TX networks. A USB interface allows to view and to change PHY settings, to use diagnostic functions (Signal Quality & Cable Diag), as well as firmware update. Power can be supplied via USB (5V) or via the main connector (5V – 28V). The dual power supply seamlessly switches between both inputs. Using the integrated controller, automatic Master/Slave detection is supported.

  • 100BASE-T1 Port (Molex Mini50)
  • 100BASE-TX Port (RJ45)
  • Mini-USB Port (Firmware Update & Configuration)
  • Link/Activity LEDs for both network ports
  • Master/Slave role switch via DIP switch
  • Automatic Master/Slave detection
  • Operating Range: 5V - 28V DC (Main Conn) / 5V (USB)
  • Current Consumption: < 50mA @ 12V
  • Dimensions: 70 x 75 x 35 mm
  • Robust aluminium housing
  • Suitable for in-vehicle use

View product in Online-Shop
2-Port OABR Multi-Media-Switch

The OABR Multi-Media Switch easily connects OABR and Fast Ethernet networks. FE access is provided directly and via a built-in USB-ETH bridge. The switch supports VLAN tagging and port mirroring which can be controlled by the provided graphical UI. It also includes a CAN monitor and a Wake-up Line.

  • 1x High-Speed CAN (up to 1MBit)
  • 2x OABR BroadReach® Port
  • 1 Port Fast Ethernet (100BASE-TX)
  • 1 Port USB to Ethernet (100 MBit/s via USB2.0)
  • 1 Port USB-B (Configuration & FW update)
  • Operating voltage: 8 to 16 Volt DC
  • Dimensions: 120 x 80 x 35 mm
  • Robust, EMI optimized aluminium body
  • Automotive grade
  • Life-Cycle management functions
  • Simple Firmware update via GUI
  • Tyco automotive Lock-Connector
  • GUI Configuration of Master/Slave, HDX/FDX
  • Port Forwarding, Mirroring, VLAN
  • Tagging, CAN Settings, Wake-up Settings

View product in Online-Shop
Download Flyer (DE)
Download Flyer (EN)